emergency electrician FulhamEfficient and affordable electrician in your area - check our website and call us if you need our services =>
Orders for electricians Jobs electrician relies primarily on the installation of electrical equipment. Additional duties of the repair of electrical installations, but more often during the installation electricians team takes care of it to ensure the longest operating electricity networks in a specific object without intervention. Very often, electricians during the installation of their own select appropriate cables, and so on, and the role of the customer is limited to the financing of the project.
Regulations may be established by city, county, provincial/state or national legislation, usually by adopting a model code (with or without local amendments) produced by a technical standards-setting organisation, or by a national standard electrical code.
Electrical codes arose in the 1880s with the commercial introduction of electrical power. Many conflicting standards existed for the selection of wire sizes and other design rules for electrical installations.
The first electrical codes in the United States originated in New York in 1881 to regulate installations of electric lighting. Since 1897 the US National Fire Protection Association, a private non-profit association formed by insurance companies, has published the National Electrical Code (NEC).
This is due to the fact that the electrician with extensive experience certainly much better than the person selects the equipment which has no idea about electrical engineering.
Basic electric knowledge - wires
Wiring safety codes are intended to protect people and property from electrical shock and fire hazards.
States, counties or cities often include the NEC in their local building codes by reference along with local differences.
The NEC is modified every three years.
It is a consensus code considering suggestions from interested parties. The proposals are studied by committees of engineers, tradesmen, manufacturer representatives, fire fighters and other invitees.
Since 1927, the Canadian Standards Association (CSA) has produced the Canadian Safety Standard for Electrical Installations, which is the basis for provincial electrical codes. The CSA also produces the Canadian Electrical Code, the 2006 edition of which references IEC 60364 (Electrical Installations for Buildings) and states that the code addresses the fundamental principles of electrical protection in Section 131. The Canadian code reprints Chapter 13 of IEC 60364, but there are no numerical criteria listed in that chapter to assess the adequacy of any electrical installation.
Although the US and Canadian national standards deal with the same physical phenomena and broadly similar objectives, they differ occasionally in technical detail. As part of the North American Free Trade Agreement (NAFTA) program, US and Canadian standards are slowly converging toward each other, in a process known as harmonisation.
In Germany, DKE (the German Commission for Electrical, Electronic and Information Technologies of DIN and VDE) is the organisation responsible for the promulgation of electrical standards and safety specifications.
DIN VDE 0100 is the German wiring regulations document harmonised with IEC 60364.
In the United Kingdom, wiring installations are regulated by the Institution of Engineering and Technology Requirements for Electrical Installations: IEE Wiring Regulations, BS 7671: 2008, which are harmonised with IEC 60364.
The 17th edition (issued in January 2008) includes new sections for microgeneration and solar photovoltaic systems.
The first edition was published in 1882.
In Australia and New Zealand, the AS/NZS 3000 standard, commonly known as the "wiring rules", specifies requirements for the selection and installation of electrical equipment, and the design and testing of such installations.
The standard is mandatory in both New Zealand and Australia; therefore, all electrical work covered by the standard must comply.
In European countries, an attempt has been made to harmonise national wiring standards in an IEC standard, IEC 60364 Electrical Installations for Buildings. Hence national standards follow an identical system of sections and chapters.
However, this standard is not written in such language that it can readily be adopted as a national wiring code.
Neither is it designed for field use by electrical tradesmen and inspectors for testing compliance with national wiring standards.
By contrast, national codes, such as the NEC or CSA C22.1, generally exemplify the common objectives of IEC 60364, but provide specific rules in a form that allows for guidance of those installing and inspecting electrical systems.
The international standard wire sizes are given in the IEC 60228 standard of the International Electrotechnical Commission.
In North America, the American Wire Gauge standard for wire sizes is used. Źródło: https://en.wikipedia.org/wiki/Electrical_wiring#Wiring_safety_codes
Building wiring is the electrical wiring and associated devices such as switches, meters and light fittings used in buildings or other structures. Electrical wiring uses insulated conductors.
Wires and cables are rated by the circuit voltage, temperature and environmental conditions (moisture, sunlight, oil, chemicals) in which they can be used, and their maximum current. Wiring safety codes vary by country, and the International Electrotechnical Commission (IEC) is attempting to standardise wiring amongst member countries.
Colour codes are used to distinguish line, neutral and earth (ground) wires.